100mm Bathroom Extractor Fan with White LINEA Front Panel with Painted Silver Stripes

Ventilation systems need not be boring and commonplace. Indeed, they should not be so. Using System+ products, you can easily match a decorative panel to a ventilation fan to hide the fan unit underneath.

Linea panels in the white colour with a metallic band is a decoration to have. System+ front panels are attached by means of dedicated latches, so you can easily exchange it or detach them for cleaning. This solution creates entirely new design possibilities.​​​​​​​
 

Fan comes with the standard option, timer, humidity sensor or pull cord depending on what is chosen from the drop down menu.

Features:

• ABS plastic
• ball bearings
• IPX4
• maximum operating temperature 40°C
• ceiling installation allowed
• non-return valve (ZZ) usage ability

• The fan with humidity sensor, when connected to the power supply, switches on when a certain level of humidity is detected.
• The unit is switched off with a programmed delay (3-30 minutes).
• The adjustment is supported with a diode (green) placed next to the potentiometer used to set the humidity sensor sensitivity.
• The fan can also operate with the light switch (the unit is switched on togather with the light). The unit is switched off with a programmed delay (3-30 minutes) after light is switched off.

Specifications:

Voltage: 240V/50Hz
Consumption: 10W
Max Flow Rate: 102m3/h
Protection class: IP-X4
Max Noise Level: 35Db