My bag - 0 Item(s)

Total:

£0.00

Product Description

EVERBUILD FIX & FILL are quick setting one part polyurethane foams in aerosol form. FIX & FILL is supplied with attachable nozzles. The foam expands on application to up to 50 times its original volume and expands on application by 150%.

Once cured, the foam can be cut, sawn or plastered over after only one hour providing the working temperatures (can and surfaces) are between +5 to +25oC, ideally 20oC.


 Benefits
 ·     Quick setting - can be cut, sawn or plastered in 1 hour.
·     Economical in use - expands up to 50 times its original volume.
·     Fills irregular and broad gaps where most conventional fillers would fail.
·     Possesses insulating and sound deadening properties.
 Areas for Use
 Filling
·        Gaps around pipe entries through walls.
·        Gaps around window frames, door frames.
·        electrical wire chasing prior to plastering
·        deep joints prior to applying sealant or plaster
·        irregular gaps in stone, brick, concrete or plaster
 Fixing
·        door frames
·        timber structures
·        Window sills and thresholds.
·        Window frames 
Insulating
·        Behind cladding to exterior walls.
·        behind soffit and barge boards
·        In automotive applications. 
Surface Preparation
 
Ensure all surfaces are clean, sound and free from dust and loose particles. Moisten surfaces to be sealed with water. This assists the curing process.
 
Application 
 
ALWAYS WEAR PROTECTIVE GLOVES.
Shake can well before use (about 20 times). 
For the FILL AND FIX PRODUCT, carefully fix nozzle. Do not overtighten or force.
ALWAYS USE CAN UPSIDE DOWN. For GUN GRADE, tighten securely into one of our range of guns.
Only partially fill cavities as the foam will expand to fill the remaining space. Any excess foam can be removed whilst still wet with EVERFLEX FOAM CLEANER. Cured foam must be removed mechanically.. When used for fixing door frames, supports must be used until the foam is fully cured. 
 
IMPORTANT – Re-use is only possible by cleaning the nozzle and valve tip with EVERBUILD DUAL PURPOSE FOAM CLEANER before the foam has cured. Do not push any object into the valve as the contents may explode.
 
Specific Data
 
Expansion
37 litres (750ml can) 25 litres  (500ml can)  
Cell Structure
Medium fine
Tack Free
Approx. 8 minutes
Cuttable
20 mins to 1 hour depending on bead dimensions.
Full Load Bearing Stability
App, 12 hours (20mm bead)
Working Temps
5oC - 25oC. (Optimum 20oC)
Tensile Strength
18N/cm2 (DIN 53455)
Elongation At Tension
30% (DIN 53455)
Shear Strength
8N/cm2 (DIN 53422))
Flexural Strength
20N/cm2 (DIN 53423)
Compressive Strength
5N/cm2 (DIN 53421) at 10% stress.
Water Absorption
0.3 Vol % (DIN 53428)
Thermal Conductivity
0.04 W/Mk (DIN 52612)
Temp Res Of Cured Bead
Long Term:   -40 - +100oC
Short Term:  -40 - +130oC
Building Material Class
B3 (DIN 4102, Part 1)
 
Health & Safety


Consult MSDS for full list of hazards
Storage
Store upright between 20 and 25oC Pressurized container. Protect from sunlight and do not expose to temperatures above 50oC. Do not pierce or burn the can even after use.  Store as flammable liquid.
Note: Elevated temperatures will reduce shelf life dramatically.
Shelf Life
12 months in original containers at stated storage temperatures.

Specifications

Brand
Everbuild
Product Code
EVERBUILD EXPANDING FOAM X 12
Weight
10kg
product review overlay image

Customer reviews

No reviews left yet
Write a review

Delivery & Returns

As per our terms and conditions.

Customer Reviews

FIX & FILL EXPANDING FOAM & FILLER 750ml EVERBUILD QUICK SETTING GAPS FILLS X 12

Item in Stock (1 Available)

Product Code: EVERBUILD EXPANDING FOAM X 12

£56.70 £47.25 (ex. VAT)

Login to add this product to your wishlist.

You Will Earn 56 points which is the equivalent of £0.56