Mapp Hand Torch Self Igniting JH-6ST Trigger Start Torch Hot Turbine Flame

MAPP Hand Torch Self Igniting JH-6ST

FEATURES:

• CGA600 connections
• Adjustable pressure
• Use with MAP or PROPANE GAS
• Built In Easy Auto Start / Off Ignition. Easily Ignites and Extinguishes the Flame Quickly.
• Adjustable Flame Control Dial Allowing for Desired Flame Size | Flame lock, so you don't have to hold the trigger.
• Suitable for Soldering, Brazing, Heat Treating, Loosening bolts, Light Welding, Stripping Paint, Cooking, Searing Steak etc.

APPLICATION:

• Used for Copper/ Brass Tubes Welding/Brazing
• Used for Copper/ Brass Fittings or Welding/Brazing
• Valve Body made of Brass
• For use with 14.1-16 OZ Containers
• HVAC After Market

Gas type: Map and Propane

Connection standard: CGA600

Container: For use with 14.1-16 OZ Containers

Switch model: Turned off when turning clockwise.

Regulator rating: 2.59M Pa (375psi) Maximum Gas Pressure

Made of material: Brass and Stainless Steel

Copper tubing size capability with map gas: Max. 60 mm Silver Solder: Max. 35mm

Maximum working temperature: 1300 °C (tested with a coupler, with MAPP gas)

Maximum flame temperature: 1982 °C (3600°F)

CAUTION: Low flame setting will result in overheat of the tip